A Question of Lubrication

My garage door had been making a little extra noise and seemed to be moving just a little bit slower lately. I did what anyone would do – I checked the log and found that I had neglected my lubrication duties! So I pulled on a pair of latex gloves, grabbed an old towel for the inevitable mess and went to work. I mopped up the old grease from the tracks – the towel collected the gobs of gritty goop nicely. I shot the rollers and the chain with fresh lithium grease. I ran the mechanism several times, paying attention that I’d gotten the grease into all of the moving parts. It appeared that over the years the chain had stretched some and I wondered briefly when it would fail…

And suddenly it stopped, mid-cycle! What’s more, I think I saw wisps of smoke curling from within the motor power head’s housing. Smelled like… and I would later confirm… eau-de-silicon. More precisely, the motor’s startup capacitor was had fried.

Stanley, the manufacturer of the unit, stopped making garage door openers back in the late 90s, the Web told me. Not much chance of finding replacement parts.

It still works to a degree if it’s had a chance to cool down. I can tap the button and if I twist the motor’s shaft with pliers before it shuts down the motor will start. But that’s no long-term solution. It’s time to replace the unit. (To be honest, the door itself has seen better days as well. It didn’t help that I kicked a hole in it, in anger, one morning long ago. But the opener is the pressing matter now.)

I find myself considering which type of mechanism is best. The current unit has a chain. It’s noisy and requires maintenance – maintenance which I seem to neglect. There are belt drive units. Belts can be good these days. My Harley has a belt as the final drive – I certainly don’t miss the chain with all the associated headaches! I hear belts are quieter and require no maintenance, but the belt can twist over time. Then there’s the screw drive. The better screws seem strong but they sure are pricey. Decisions, decisions.

I’m leaning toward the belt.

Added July 14, 10:10 AM:
I ended up installing a Genie Powerlift Excelerator, a 1/2 HP screw drive. After reading lots and lots of reviews – the wisdom of the ‘net – I concluded that the small additional expense would be worth it over time. I completed the install in a couple of hours and the final adjustment took a bit less than an hour.

We’ll see how it holds up. The one before it set a pretty high bar. The 1/3 HP Stanley Professional 7200 installed September 14, 1985 failed July 11, 2007. That’s 21 years 300 days, not too shabby!

Share this:

5 thoughts on “A Question of Lubrication”

  1. Ah, ebay. The place where just about anything can be found. Glad to hear things worked out, Kwan. Now, watch that startup condenser on the motor. That was my downfall.

    This looks like a good time to mention that I’m VERY pleased with the Genie Powerlift Excelerator. Once it’s installed and adjusted and feeling confident about itself (yeah, I know it doesn’t, really, but it *seems* that way because it takes a certain number of open/close cycles before) the door opens like a rocket. When arriving on the motorcycle I thumb the remote in my pocket as I approach and ride right in. Like the freakin’ Bat Cave.

  2. Thanks Rick. I actually found 2 remotes on eBay and bought them. I came back to post that message and found your response.

  3. Sorry, Kwan, I do not know. It’s an old unit and, as you say, Stanley no longer makes them. Too bad you didn’t write within a couple of weeks of my posting – I would have sent you my remotes. They’re long since carted away with the trash. Sometimes timing is everything.

  4. I have two 1/3 HP Stanley Professional 7200. Installed 1988 both work fine. But one of the remote just stopped working. Do you what I can use for a substitute? Now the company no longer make them? I would appreciate your help.
    Thanks.
    Kwan

  5. Imagine, just happening to be updating my blog, testing the link to here, and finding I’m just in time to celebrate MORE POWER on the garage door! Tim the Tool Man, eat your heart out.

Leave a Reply

Your email address will not be published. Required fields are marked *